Kyocera 303NC37150 Belt Lift

Kyocera 303NC37150 Belt Lift

Replace a worn, stretched, or damaged finisher lift belt with the Genuine Kyocera 303NC37150 Belt Lift.

This internal service component is used in the main output tray lift mechanism of compatible Kyocera document finishers. The belt works with the tray drive motor, pulleys, shafts, and related components to raise and lower the finisher’s main output tray as printed documents accumulate.

A properly functioning lift belt helps the finisher maintain the correct tray position for reliable stacking and document output.

Product Information

• Manufacturer: Kyocera
• Manufacturer Part Number / SKU: 303NC37150
• Alternate Part Number: 3NC37150
• Kyocera Description: BELT LIFT
• Product Type: Finisher Main Tray Lift Belt
• Machine Section: Main Tray / Finisher Lift Mechanism
• Condition: Genuine Kyocera OEM
• Quantity: 1 belt per unit ordered

Compatible Kyocera Finisher

The 303NC37150 Belt Lift is documented for use with:

• Kyocera DF-7120 Document Finisher

Kyocera parts documentation shows two 303NC37150 lift belts used within the DF-7120 main tray mechanism.

The same belt design also appears in related Kyocera finisher platforms. Compatibility should therefore be verified by the exact finisher model and part number before ordering.

What Does the Belt Lift Do?

The main output tray on a high-capacity finisher must move vertically as printed pages accumulate.

The 303NC37150 Belt Lift helps transfer motion from the tray drive system to the lifting mechanism so the tray can move smoothly up and down.

A properly functioning belt helps support:

• Smooth main-tray raising and lowering
• Correct output tray positioning
• Reliable document stacking
• Consistent interaction with tray sensors
• Proper finisher operation during large print jobs

Signs a Lift Belt May Need Replacement

A worn or damaged lift belt may contribute to symptoms such as:

• Main output tray failing to raise or lower
• Tray movement that is uneven or jerky
• Slipping or clicking noises
• Tray-position errors
• Output stacking problems
• Finisher-related service codes

Because similar symptoms can also be caused by pulleys, motors, sensors, shafts, or related drive components, proper diagnosis is recommended before replacing an individual belt.

Professional Installation Recommended

The 303NC37150 is an internal finisher service component. Installation by a qualified Kyocera service technician is recommended.

Proper belt routing, tension, pulley alignment, and tray positioning are important for correct operation after replacement.

Genuine Kyocera Replacement Part

Using the genuine Kyocera 303NC37150 helps ensure the correct belt dimensions, fit, and mechanical performance intended for the finisher’s main tray lift system.

Product Information Disclaimer

Product Information Disclaimer: Specifications and product information are approximate and subject to change due to ongoing manufacturer improvements. Information shown is based on the most current manufacturer data available at the time of publication.

Product photos are for illustration purposes only. Manufacturers may change product packaging, labeling, appearance, or included packaging materials from time to time without notice. The product received may therefore differ slightly in appearance from the image shown while remaining the correct manufacturer part number and item ordered.

Please review our Return Policy in the Terms and Conditions before purchasing.