Kyocera HD-6 32GB SSD Hard Drive 1505J40UN0

The Kyocera HD-6 32GB SSD hard drive is a solid-state drive that is designed and manufactured by Kyocera Corporation, a multinational electronics company based in Japan. The HD-6 32GB SSD was released originally in 2009 and was one of the first SSDs to be produced by Kyocera.  It continues to be the industry standard for solid state drives.

Solid-state drives (SSDs) are a type of storage device that use NAND-based flash memory to store data. Unlike traditional hard disk drives (HDDs), SSDs do not have any moving parts, which makes them more reliable, faster, and less prone to failure. The Kyocera HD-6 32GB SSD is a 2.5-inch drive that is compatible with most Kyocera Printers that support SATA interfaces.

The Kyocera HD-6 32GB SSD has a storage capacity of 32GB, is more than adequate for most printers but an upgraded HD-7 (128GB) is also available.  The drive uses multi-level cell (MLC) NAND flash memory, which is a type of memory that allows multiple bits of data to be stored in a single memory cell. MLC memory is less expensive than single-level cell (SLC) memory, but it also has a lower endurance and a shorter lifespan.

The Kyocera HD-6 32GB SSD has a maximum sequential read speed of up to 240MB/s and a maximum sequential write speed of up to 80MB/s.  The drive also has a random read speed of up to 27,000 IOPS (input/output operations per second) and a random write speed of up to 5,000 IOPS.

The Kyocera HD-6 32GB SSD uses a SATA II interface, which has a maximum data transfer rate of 3.0 Gbit/s. The drive also supports Native Command Queuing (NCQ), which is a feature that allows the drive to prioritize and optimize read and write commands for better performance. The drive has a low power consumption of 0.15W when idle and 1.1W when in use, which makes it energy-efficient and ideal for use in portable devices such as laptops.

The Kyocera HD-6 32GB SSD also features advanced wear-leveling and error-correction technologies, which help to extend the lifespan of the drive and prevent data loss. The drive has a Mean Time Between Failures (MTBF) of 1.2 million hours, which means that it is expected to last for a long time before experiencing any failures.

In conclusion, the Kyocera HD-6 32GB SSD is a reliable and fast storage device that was designed for use in Kyocera Laser printers.  The HD-6 keeps your data secure and retrievable.

Works with these printers:

• P3145dn
• P3150dn
• P3155dn
• P3260dn
• M3145idn
• M3645idn
• M3655idn
• M3860idn
• M3860idnf
• M4125idn
• M4132idn
• M6630cidn
• M6235cidn
• M6635cidn
• M81245cidn
• M8130cidn
• CS 308ci
• and several Legacy Kyocera Machines… just ask we will do the research.